For instructions on how to drain the water from the electric water drain control panel, please refer to the video below or steps 1.to 5.

​

※Electric water drain control panels are installed on walls mainly around bathrooms, toilets and washing machines in some properties in Hokkaido, Aomori, Akita, Iwate, Miyagi, Yamagata and Fukushima prefectures.

〈Operation procedure for the electric water drain control panel〉

1.Open all the faucets in the room.

※If your kitchen has a single-lever faucet, it will provide cold water in the kitchen and hot water in the bathroom.

2.Press the "Push"「押」 button on the electric water drain control panel to switch from "Water flow"「通水」 to "Water drain"「水抜」.

​

3.Wait until the "Drain"「水抜」 light stops flashing and turns on.

※If the electric water drain control panel is not working properly, click here.

5.Once you have confirmed that no water is coming out of any of the faucets you opened in step 1) above, close all of them tightly.

​

This completes the draining procedure using the electric drain control panel.

​

〈Precautions when draining water〉

・If you forget to turn off the faucet when carrying out step 5 above, water will leak when you turn on the water. Be sure to turn off the faucet securely at the end.